Raven Cruizer II Manual do Utilizador

(Software Version 3.2)Cruizer II™Operation Guide

8 Cruizer II™ Operation GuideGPS Status IconThe current source and status of DGPS signal is displayed in the upper, left corner of the Home Screen.Not

Manual No. 016-0171-415 Rev. F 9Starting Guidance After completing the initial setup, the Cruizer II may be used to provide guidance for field operati

10 Cruizer II™ Operation Guide6. The Select Pattern screen also displays the following Swath Guidance Pattern options:Note: Refer to the Starting A-B

Manual No. 016-0171-415 Rev. F 11Resume a Saved Job and Delete Jobs1. From the Home Screen, touch Start Job .2. To open the job with coverage history

12 Cruizer II™ Operation GuideGuidance ScreenOnce a Pattern is selected for the job, the Guidance Screen is displayed on the Cruizer II touch screen.T

Manual No. 016-0171-415 Rev. F 136. The Section Status for configured sections will be displayed in this area. During the operation, the section indic

14 Cruizer II™ Operation GuideForward OverrideThe Forward Override will be displayed in the lower, left corner of the guidance screen only if the Cr

Manual No. 016-0171-415 Rev. F 15A-B Guidance Path Tools The following tools will be available in the Guidance Menu if an A-B guidance path is set u

16 Cruizer II™ Operation Guide5. Select the desired marker location which the Cruizer II will use to record the boundary. The marker location may be s

Manual No. 016-0171-415 Rev. F 17Field Review Mode The Field Review Mode allows the operator to view any area of a field operation regardless of the c

While every effort has been made to ensure the accuracy of this document, Raven Industries assumes no responsibility for omissions and errors. Nor is

18 Cruizer II™ Operation Guide2. When the features nudge is enabled, the display will automatically pan and zoom onto the current vehicle location.3.

Manual No. 016-0171-415 Rev. F 19Ending a Job Use the following steps to end a Job:1. From the Guidance Screen with an active job in progress, touch M

20 Cruizer II™ Operation GuideVehicle Tilt - The Tilt icon is only displayed if an optional TM-1 Tilt Module is connected to the console. Select the T

Manual No. 016-0171-415 Rev. F 21Computer GPS Display - Select the mode (Day or Night) for the Guidance Screen display. Use the Screen and Lights slid

22 Cruizer II™ Operation GuideFavorites Menu The Favorites Menu allows the operator to select frequently used tools for easy access during operations.

Manual No. 016-0171-415 Rev. F 23AccuBoom™Note: The following sections provide information on configuring the AccuBoom system and available implement

24 Cruizer II™ Operation Guide2. Touch the Settings Lock and use the No. of Sections selector or Keypad to set the number of available sections (max

Manual No. 016-0171-415 Rev. F 25Look AheadAccuBoom monitors the GPS position and coverage map while considering the look ahead times to begin control

26 Cruizer II™ Operation GuideIt is recommended to disable sections corresponding to fence row nozzles or spray guns to allow the operator to manually

Manual No. 016-0171-415 Rev. F 27File Maintenance The File Maintenance screen displays a list of the job files currently stored on internal memory. To

Manual No. 016-0171-415 Rev. F 1ContentsOverview. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2Care and Maintenance. . . . . . . . . . .

28 Cruizer II™ Operation GuideCoverage MapsThe coverage map for the job currently stored on the console may be saved to a flash drive which may then b

Manual No. 016-0171-415 Rev. F 29Using RTK Corrections This section contains information on the available settings and configuration of the internal d

30 Cruizer II™ Operation GuideWireless CommunicationThe following icons may be displayed in the wireless status area:Wireless Status ScreenTouch the w

Manual No. 016-0171-415 Rev. F 31Connection StatusThe connection status screen displays the following information:Signal Strength - Displays bars to r

32 Cruizer II™ Operation GuideBaud Rate Settings Baud rate settings allow the Cruizer II console to communicate with other equipment such as steering,

Manual No. 016-0171-415 Rev. F 33CAN Diagnostics If the Cruizer II console is connected to a Raven CANbus system, the CAN Diagnostics screen displays

34 Cruizer II™ Operation Guide11.From the Home Screen, select:Tools Menu Computer Updates .12.Select the desired update from the list and touch St

Manual No. 016-0171-415 Rev. F 35CANbus TroubleshootingField boundary recording never finishes or when finished, is not the shape of the field•After b

36 Cruizer II™ Operation GuideSystem Connection DiagramsAdditional diagrams are available on the Raven Applied Technology Division web site:www.ravenh

Manual No. 016-0171-415 Rev. F 37FIGURE 3. Cruizer II with SmartSteer 3D, SmartBoom, and SCS 440

2 Cruizer II™ Operation GuideOverviewThe Cruizer II™ guidance system offers advanced guidance with an easy-to-use touch screen. In addition, the Cruiz

38 Cruizer II™ Operation GuideFIGURE 4. Cruizer II RTK with Slingshot and SmarTrax

Manual No. 016-0171-415 Rev. F 39LicenseCruizer contains code from the log4c v1.3 and defaultappender v1.2Copyright (c) 2001, Bit Farm, Inc. which is

Raven Industries will not assume any expense or liability for repairs made outside our facilities without written consent. Raven Industries is not res

Raven Applied Technology products that have been registered online are covered for an additional 12 months beyond the Limited Warranty for a total cov

Notice: This document and the information provided are the property of Raven Industries, Inc. and may only be used as authorized by Raven Industries

Manual No. 016-0171-415 Rev. F 3Care and Maintenance• Harsh chemicals may damage the touch screen. Clean the touch screen and console exterior as need

4 Cruizer II™ Operation GuideInstallation1. Mount the antenna on the centerline of the tallest point of the vehicle (usually on the top of the vehicle

Manual No. 016-0171-415 Rev. F 5Initial StartupThe first time that the console is powered up, a Setup Wizard will step through the initial setup and c

6 Cruizer II™ Operation Guide• Left/Right - The left/right offset is the distance from the GPS antenna to the center line of the boom or implement.Not

Manual No. 016-0171-415 Rev. F 7Home Screen The version of firmware currently loaded on the Cruizer II console is displayed in the upper, right corner